Delkin Blog

SD Card Advice V2 for Zynq and Zynq UltraScale+ SoC Products

SE16ANZ49-1B000-3 - SD - SD - 16GB - MLC | Delkin Industrial

 

Check out this helpful information on SD . Below is a link to download an update to the list of suggestions as well as helpful information that will guide

Engineers working with Xilinx Zynq®‐7000 and Zynq® UltraScale+ SOC based solutions from Avnet. Advice is provided for selecting and working with SD cards for their own system designs.

 

CLICK HERE TO DOWNLOAD DOCUMENT

Related Posts

Delkin Applications
Top Reasons for Industrial Flash Storage Use in Transportation Applications

  Many modes of transportation including motor vehicles, trains, and aircraft use industrial flash storage...

Life Cycle Management
Technical Success Story: Program/Erase Cycles and SMART Commands

  A challenge faced by application engineers is the concept of balancing reliability and industrial...

Utility+ msata
Solid State Flash Drive SATA

  A solid state flash drive SATA is an SSD that uses the SATA interface....

A Look at Legacy Electronics Memory

  Although conventional wisdom dictates using the newest technology possible, it is not always feasible...

Write Protection

  Purpose of Write Protection Write protection is a feature on flash storage cards and other...

Flash Storage Interface- NAND vs. NVMe

  NAND vs. NVMe- The need for data storage capacity and speed in industrial applications...

Technical Success Stories: Industrial Flash Storage Customization

  “One-size-fits-all does not work for our embedded/industrial high capacity application. Flash storage customization is...

A Look at microSD Memory Suppliers

  Are you looking for reliable, rugged storage for a device used in industrial operating...

Industrial Flash Storage in Flight Data Recorders

Flight data recorders are a key component of aviation safety. Information gleaned from flight...

Technical Success Story: Locked BOM Maximizes Performance and Speed

  A locked BOM, or bill of materials, is one of the key advantages to...