MLC/ Industrial 3D microSD
- Compliant with SD 3.0
- Supports SD and SPI Modes
- Capacities in 4GB – 128GB
- Two Operating Temperature Ranges
- Utility: -25 to 85°C
- Utility+: -40 to 85°C
- Utility Endurance: -40 to 85°C
- Read / Write Speeds up to 90 / 80MB/s*
Utility, Utility+ & Utility Endurance microSD
With many light industrial, medical and handheld designs requiring a cost effective industrial-grade microSD, Delkin’s Utility line is the ideal storage solution. Utility microSD cards are offered in 4GB to 128GB, built with a controlled BOM and managed life cycle to deliver consistent performance and no surprises. The Utility line is compliant with the SD 3.0 standard for read / write speeds up to 95 / 90 MB/s and built to industrial standards. Utility microSD cards are rated for -25 to 85°C operation and are mechanically rugged, to withstand a range of environmental conditions. Utility+ & Utility Endurance microSD cards are rated for full industrial temperature operation, from -40 to +85°C.
Delkin Utility, Utility+ & Utility Endurance microSD Part Numbers
|Capacity||Utility Series||Utility+ Series||Utility Endurance Series|
|32GB||S432VSKLB-U1000-3 NRND||S332FQYFA-U1000-3 NRND||S332FSTL2-U3000-3|
|64GB||S464FQYFA-U1000-3 NRND||S364FQYFA-U1000-3 NRND||S364FSTL2-U3000-3|
Utility microSD -25 to +85°C
Utility+ microSD -40 to +85°C
-40 to +85°C
1500G, 0.5msec duration
20 – 80Hz / 1.52mm displacement
80Hz – 2000Hz, 20G acceleration
Reliability / Endurance
MLC: 12 TBW
> 3 million hours (0 to +25°C)
> 200,000 hours (60°C)
MLC/ Industrial 3D
uSD: 4GB – 128GB
MLC/ Industrial 3D
Sequential Read up to 90MB/s*
Sequential Write up to 80MB/s*
1Per MIL-STD-810G, Method 516.6 Procedure I. Testing to other shock profiles available upon request.
2Per MIL-STD-810G, Method 514.6; Category 24. Testing to other vibration curves available upon request.
3TBW figures are representative for 4GB capacity based on optimal usage model. Contact Delkin for life estimates on other capacities or using your specific usage parameters.
4Performance figures shown are for highest capacity configuration, and will vary by capacity, host, usage model and other factors.
- Compliant with SD Specification 3.0, backward compatible to 1.1 & 2.0
- Operating BUS modes – SPI and SD
- Advanced wear leveling and ECC
- SMART support
- SD Adapters available
- Customizable with custom pad printing, settings, content loading / duplication, etc.
- Compliant with European Union Directive 2011/65/EU (RoHS)
Order Industrial Engineering Sample
Note: Requests for samples are considered on a case-by-case basis and are available for B2B Industrial customers only.
Looking for our consumer retail website? Visit www.delkindevices.com