Industrial Rugged USB Flash Drive
- Compliant with USB 2.0 & 1.1 Standards
- Capacities from 128MB to 32GB in SLC flash
- Capacities from 2GB to 16GB in MLC flash
- -40 to 85°C Operating Temp
- Read / Write Speeds up to 32 / 30MB/s*
While low-cost industrial USB flash drives are readily available on the market, Delkin Devices offers a line of portable USB drives in a variety of flash, capacity and form factor options to meet the unique needs of industrial applications. Whether the design calls for -40 to + 85°C operating temperature, high endurance SLC flash or a customized industrial USB flash drive, Delkin can provide the solution. Multiple housing choices are available, including two different lengths in an array of colors or even an un-cased PCB, along with the flexibility to custom pad print, serialize or label the drives. This level of customization allows a rugged USB flash drive to reflect corporate branding, ideal when being utilized for firmware updates or critical data transfer.
Delkin controls the bill of materials for the industrial USB flash drives, while most commercially available drives change without notice to reduce cost or based on component availability. Delkin locks the specific flash chips, controller and firmware revision in the drive part number, such that any change to one of these components would necessitate a new part number. Delkin also manages the life cycle of the industrial USB products, providing advance EOL notification with the opportunity to place last time buy orders and qualify the replacement solution.
In addition to the physical customization options available on the industrial USB drives, Delkin also provides data load services and configurations with custom formatting, PID/VID fields or other settings.
In addition to the Industrial USB flash drives, Delkin also offers Embedded USB (eUSB) products. Contact Delkin for more information.
Delkin Industrial USB Flash Drive Part Numbers
|Capacity||B270 Series SLC Flash||B270 Series MLC Flash|
|UY16MGGVS-SN000-D (short)||UY16NKBVS-SN000-D (short)|
|UY32MGMVS-SN000-D (short)||UY32NK0VS-SN000-D (short)|
-40 to +85°C
-50 to +85°C
10G, 11msec – Sawtooth Waveform
20Hz – 1000Hz @ 0.04 G2/Hz,
1000Hz – 2000Hz @ 0.01 G2/Hz
Reliability / Endurance
SLC: 234 TBW
MLC: 12 TBW
> 2 million hours (0 to +25°C)
> 200,000 hours (60°C)
128MB – 32GB
2GB – 16GB
Sequential Read up to 32MB/s
Sequential Write up to 30MB/s
Sequential Read up to 20MB/s
Sequential Write up to 17MB/s
1Per MIL-STD-810G, Method 516.6 Procedure I. Testing to other shock profiles available upon request.
2Per MIL-STD-810G, Method 514.6; Category 24. Testing to other vibration curves available upon request.
3TBW figures are representative for 4GB capacity based on optimal usage model. Contact Delkin for life estimates on other capacities or using your specific usage parameters.
4Performance figures shown are for highest capacity configuration, and will vary by capacity, host, usage model and other factors.
- Convenient form factor available in two lengths (57.6mm & 67.7mm, including cap)
- Compliant with High Speed USB 2.0 (backward compatible with all USB 1.1 ports)
- Advanced wear leveling and ECC
- Customizable with conformal coating, case colors, pad printing, serialization, settings, content loading, etc.
- Compliant with European Union Directive 2011/65/EU (RoHS)
Industrial Embedded USB
The Embedded USB, or eUSB, form factor continues to be popular as a boot drive for industrial applications, due to the small size, ease of integration and mechanical ruggedness.
Industrial USB Flash Drive
While low cost commercial USB flash drives are readily available on the market, Delkin Devices offers a line of portable USB drives in a variety of flash, capacity and form factor options to meet the unique needs of industrial applications.
Order Industrial Engineering Sample
Note: Requests for samples are considered on a case-by-case basis and are available for B2B Industrial customers only.
Looking for our consumer retail website? Visit www.delkindevices.com