Delkin Blog

A Look at Industrial SSD, Industrial Grade Solid State Drives

DE2TAPX7R-35000-2 - SATA - 2.5" SSD - 2TB - MLC

 

If you are looking for a reliable, high performance flash storage device, then you’re looking for industrial SSD. Industrial SSDs exceed the performance and endurance capabilities of commercially available models, which is why they are used for embedded storage in industries from transportation to gaming and many more. Is an industrial SSD the right flash storage solution for your application? Here is what you need to know.

 

Why is industrial SSD superior to commercial models?

Stability is the key factor that sets industrial SSDs apart from commercial storage devices. Industrial SSDs are designed with a controlled BOM—Bill of Materials—that includes the flash, controller, and firmware. With a controlled BOM, the SSD will not have component changes until the parts number is discontinued. Further, you will be notified of these changes before they occur, allowing you to rely on your SSD for even critical data logging.

 

What are the technical specifications?

Industrial SSDs are available in a range of capacities in SLC flash. The technical specs are as follows:

 

  • 4GB – 64GB capacity range
  • -40 to 85 degrees C operating temperature
  • -50 to 100 degrees C storage temperature
  • 7GRMS vibrations (20Hz – 1000Hz @ 0.04 G2/Hz, 1000Hz – 2000Hz @ 0.01 G2/Hz)
  • 10G, 11msec – Sawtooth Waveform shock
  • 937 TBW
  • < 3 million hours MTBF (0 to 25 degrees C)
  • 145MB/s read and 130MB/s write

 

Industrial SLC 2.5” SSDs are also available for legacy SATA designs with either a standard 2.5” HDD or SSD slot. These SSDs have larger capacity ranges—up to 256GB—as well as faster sequential read and write performance capabilities.

 

Why choose Delkin for your industrial SSD needs?

For industrial SSD storage devices, Delkin offers the controlled BOM and extended life cycle management you need to rely on the performance of your system. Our SSDs are compliant with JEDEC MO-300B form factor and SATA Revision 2.6 specification. They also support TRIM, Native Command Queuing, and ATA Security Erase and are SMART enabled to allow performance monitoring and product life management in application. Our customer team can configure customized SSD samples and help you navigate compatibility and qualification testing, so you can be sure you’re getting the right devices every time. Contact us with your questions and let our knowledgeable team walk you through your embedded storage options.

 

Contact

  • This field is for validation purposes and should be left unchanged.

Related Posts

Delkin Applications
Top Reasons for Industrial Flash Storage Use in Transportation Applications

  Many modes of transportation including motor vehicles, trains, and aircraft use industrial flash storage...

Life Cycle Management
Technical Success Story: Program/Erase Cycles and SMART Commands

  A challenge faced by application engineers is the concept of balancing reliability and industrial...

Utility+ msata
Solid State Flash Drive SATA

  A solid state flash drive SATA is an SSD that uses the SATA interface....

A Look at Legacy Electronics Memory

  Although conventional wisdom dictates using the newest technology possible, it is not always feasible...

Write Protection

  Purpose of Write Protection Write protection is a feature on flash storage cards and other...

Flash Storage Interface- NAND vs. NVMe

  NAND vs. NVMe- The need for data storage capacity and speed in industrial applications...

Technical Success Stories: Industrial Flash Storage Customization

  “One-size-fits-all does not work for our embedded/industrial high capacity application. Flash storage customization is...

A Look at microSD Memory Suppliers

  Are you looking for reliable, rugged storage for a device used in industrial operating...

Industrial Flash Storage in Flight Data Recorders

Flight data recorders are a key component of aviation safety. Information gleaned from flight...

Technical Success Story: Locked BOM Maximizes Performance and Speed

  A locked BOM, or bill of materials, is one of the key advantages to...