Delkin Blog

SD Card Technology Advantages

CLICK HERE to watch the video presentation on SD Card Technology Advantages

 

Industrial SD - Delkin DevicesSD cards, or Secure Digital cards, are a great choice for flash memory needs. Both SD and microSD cards are used in a variety of retail and industrial applications. However, not all SD cards are created equal. They feature a variety of flash types and capacities, so selecting the right card for your needs is an important part of ensuring that your devices function as reliably and efficiently as possible. This Brain Shark presentation simplifies the process of selecting the right SD card. This information will also help you better understand the SD card technology advantages offered by Delkin.

 

Why Consider SD and microSD Cards?

There are several reasons why SD and microSD cards are so popular. One is their small physical size. Today’s devices are small, and there is a continual move for them to get even smaller. SD and microSD cards are small but powerful, so you get the memory you need in a format that fits a small device. They also offer low power consumption and good data rates. In addition, they are easy to integrate into nearly any device. This makes them a clear choice for many engineers.

 

What Are the Different Types of Flash Technology?

SD and microSD cards may feature SLC, MLC, or TLC flash. Single-level cell, or SLC, flash has the highest endurance level and is capable of 60,000 P/E cycles. MLC, or multi-level cell, flash is a mid-range option that is capable of about 3,000 P/E cycles. With TLC, or triple-level cell, flash, you can expect about 1,500 P/E cycles. SLC is used in most industrial applications. MLC is found in some industrial and some commercial applications. TLC is used in consumer devices.

 

What Should I Consider When Picking an SD Card?

There are several factors to consider when picking an SD or microSD card. The required density, the nature of the data being stored, your budget, and the device operating conditions are all important factors to keep in mind. For industrial applications with mission critical data, an SLC SD or microSD card is likely to be the best option.

 

Delkin is pleased to partner with Avnet on their Development Kits and to offer a variety of SD card options. For more information about SD card technology advantages, contact us today.

 

ORDER DELKIN INDUSTRIAL FLASH STORAGE TODAY through our distribution partner Newark.

 

Contact

  • This field is for validation purposes and should be left unchanged.

Related Posts

Delkin Applications
Top Reasons for Industrial Flash Storage Use in Transportation Applications

  Many modes of transportation including motor vehicles, trains, and aircraft use industrial flash storage...

Life Cycle Management
Technical Success Story: Program/Erase Cycles and SMART Commands

  A challenge faced by application engineers is the concept of balancing reliability and industrial...

Utility+ msata
Solid State Flash Drive SATA

  A solid state flash drive SATA is an SSD that uses the SATA interface....

A Look at Legacy Electronics Memory

  Although conventional wisdom dictates using the newest technology possible, it is not always feasible...

Write Protection

  Purpose of Write Protection Write protection is a feature on flash storage cards and other...

Flash Storage Interface- NAND vs. NVMe

  NAND vs. NVMe- The need for data storage capacity and speed in industrial applications...

Technical Success Stories: Industrial Flash Storage Customization

  “One-size-fits-all does not work for our embedded/industrial high capacity application. Flash storage customization is...

A Look at microSD Memory Suppliers

  Are you looking for reliable, rugged storage for a device used in industrial operating...

Industrial Flash Storage in Flight Data Recorders

Flight data recorders are a key component of aviation safety. Information gleaned from flight...

Technical Success Story: Locked BOM Maximizes Performance and Speed

  A locked BOM, or bill of materials, is one of the key advantages to...