Delkin Blog

A prevalent design for a solid state drive (SSD) is a 2.5 SSD with SATA. The 2.5 SSD SATA is a full-sized drive, designed for use in write-intensive applications utilized in rugged environments. This type of drive offers high endurance and is available in a wide range of capacities. These features make it a particularly good option for video recording equipment. If you are considering a 2.5 SSD SATA for your industrial application, this overview of the features will help you make a decision.

SSD Reliability

While SATA is compatible with hard disk drives (HDDs) as well as SSDs, choosing an SSD has several advantages for industrial users. SSDs are much more reliable than HDDs, particularly in industrial applications that can be exposed to high levels of shock and vibration. SSDs do not have any moving parts like HDDs do, as they record data through electronic charges. Without the spinning disk of HDDs, SSDs will not succumb to jostles the way HDDs will. As a result, they are far less prone to unanticipated failures.

SATA Compatibility

The 2.5 SSD SATA design is ideal for legacy SATA devices, as it is compatible with SATA versions I, II, and III. If you have an older device and it has a 2.5 SSD slot, then this kind of SSD could work for you. If you have a newer device that is compatible with SATA III, then you can reap the benefits of the newest possible version of SATA, which offers the best available data transfer rates.

SLC and MLC Flash Versions

2.5 SSD SATA is available in both SLC and MLC formats. SLC, or single-level cell, is a kind of flash memory in which one bit of data is stored per cell. MLC, or multi-level cell, is flash memory in which two bits of data are stored on each cell. SLC is usually considered to be the gold standard for industrial applications because it has the best available data security and reliability, the fastest operating speeds, and the longest life. However, MLC is still used in some industrial applications, particularly when more capacity is needed. Though its programming speeds are slightly slower and it has a shorter lifespan than SLC, MLC flash can still be the right fit for some industrial users.

Are you looking for more information about 2.5 SSD SATA options? Delkin can help. We offer both SLC and MLC formats in a range of capacities, with customization options available. Contact us for more information or to request an engineering sample.

ORDER DELKIN INDUSTRIAL FLASH STORAGE TODAY through our distribution partner Newark.