Installing Drivers for the Cardbus32 Adapter from the Delkin Devices Inc. Website

DO NOT INSERT THE CARDBUS ADAPTER UNTILL THE DRIVERS HAVE BEEN INSTALLED!

1. Downloading Driver From Our Website
   1. Go to www.delkin.com
   2. Navigate to Support, and then Drivers /Downloads (http://www.delkin.com/delkin_support_drivers.html)
   3. Click on CardBus AD V2.EXE
   4. A window will open allowing you to either save to your disk or open from this location. You may choose your preference.
   5. If you saved to disk:
      1. go to the directory in which you saved the file
      2. when you double left click on the file, it will self extract the files to a temp file located under your user name. EXAMPLE BELOW:
         
         C:\Documents and Settings\ ( ) \Local Settings\Temp\CARDBUS AD
   6. If you opened from location:
      1. The files have already been extracted to the above location
   7. A read me file appears. Exit the read me file
2. Installing the Cardbus32 Drivers
   1. Make sure you have your PC set to show hidden files and folders. Do this by following these steps:
      1. open a folder window (Example: My Documents),
      2. left click on Tools , and then Folder Options
      3. left click on the View tab.
      4. check show hidden files and folders.
      5. apply and exit.
   2. Connect a compact flash card to the Cardbus32 adapter and insert the adapter into the computer.
   3. Use the install wizard for installation:
      1. Choose to install From a specific location
      2. When prompted browse to the temp file the files are located in (See 1.5).
      3. Select file and click ok

After following the rest of the on screen instructions the drivers should be installed and the Cardbus32 will be ready for use.

<-- BACK