USB Embedded Drive
- Embedded USB (eUSB) Drive
- Compliant with USB 2.0 & 1.1 Standards
- SLC Capacities: 128MB – 16GB in SLC
- -40 to 85°C Operating Temp
- Read / Write Speeds up to 32 / 22 MB/s*
The Embedded USB, or eUSB, form factor continues to be popular as a boot drive for industrial applications, due to the small size, ease of integration and mechanical ruggedness. Since most processors support the USB interface, it is a natural choice when a small amount of storage is needed and the host cannot physically accommodate a traditional HDD / SSD form factor. Delkin delivers eUSB drives in high endurance SLC flash, in capacities up to 16GB, perfect for loading an OS and logging critical data. Several different 10- pin headers are available to match the processor board, in different stand-off heights and in 0.100” or 2 mm pitch.
To ensure consistent performance and host compatibility, Delkin builds all eUSB drives to a controlled bill of materials – with the specific flash chips, controller, firmware revision, connector and fixed/removable configuration locked in the part number. A new part number is required when any of these critical items is altered. Delkin also recognizes that life cycle management is one of the most important attributes for industrial users when selecting a storage supplier. Measures are taken to maximize the life cycle of industrial product offerings, but when component discontinuation is inevitable, Delkin publishes advance EOL notifications. Users then have the ability to place last time buys and qualify replacement parts in advance.
Delkin eUSB drives are also customizable, with content loading, labeling or inclusion of a new custom connector. Contact Delkin to discuss your unique requirements for Embedded USB drives or portable Industrial USB thumb drives.
-40 to +85°C
-50 to +100°C
10G, 11msec – Sawtooth Waveform
20Hz – 1000Hz @ 0.04 G2/Hz,
1000Hz – 2000Hz @ 0.01 G2/Hz
Reliability / Endurance
SLC: 234 TBW
> 2 million hours (0 to +25°C)
> 200,000 hours (60°C)
128MB – 16GB
Sequential Read up to 34MB/s
Sequential Write up to 25MB/s
1Per MIL-STD-810G, Method 516.6 Procedure I. Testing to other shock profiles available upon request.
2Per MIL-STD-810G, Method 514.6; Category 24. Testing to other vibration curves available upon request.
3TBW figures are representative for 4GB capacity based on optimal usage model. Contact Delkin for life estimates on other capacities or using your specific usage parameters.
4Performance figures shown are for highest capacity configuration, and will vary by capacity, host, usage model and other factors.
- Standard eUSB form factor with multiple connector options
- Compliant with High Speed USB 2.0 (backward compatible with all USB 1.1 ports)
- Advanced wear leveling and ECC
- Fixed disk and removable configuration options
- Customizable with conformal coating, custom labels or settings, content loading / duplication, etc.
- Compliant with European Union Directive 2011/65/EU (RoHS)
USB EMBEDDED DRIVE
The Embedded USB, or eUSB, form factor continues to be popular as a boot drive for industrial applications, due to the small size, ease of integration and mechanical ruggedness.
USB FLASH DRIVE
While low cost commercial USB flash drives are readily available on the market, Delkin Devices offers a line of portable USB drives in a variety of flash, capacity and form factor options to meet the unique needs of industrial applications.