Original Equipment Manufacturing - PC / PCMCIA Cards

Delkin’s Industrial PCMCIA ATA or PC Card provides the removable memory solution with the highest attainable storage capacity for a myriad of industrial hosts - up to 32 Gigabytes. It is virtually indestructible and is time tested in a vast variety of applications. The PC Card is roughly the dimensions of a credit card, and has a standardized 68-pin connector at one end. The PC Card’s low-power consumption, small size and ruggedness make it a great storage solution. Extended temperature operating ranges are available.

Features

PC Card ATA specification standard 68-pin interface in a Type I (3.3mm) package
3.3V / 5V single power supply operation
ISA standard Read/Write unit of 512 bytes (sector), sequential access
Maximum Density: 8 Gigabyte
Operations Modes:
Memory mode
I/O mode
True IDE mode
Internal Power on Self Test (POST)
High Reliability ECC (Error Correction Code)
Data Reliability / 1 error in 1014 bits read
Auto Sleep Mode

Specifications

Recommended Temperature Conditions

Parameter	Min.	Max.
Storage Temp.	-65°C	100°C
Commercial Operating Temp.	0°C	70°C
Industrial Operating Temp.	-10°C	85°C
Industrial Extended Operating Temp.	-40°C	85°C

Performance

Parameter	Value
*Data Transfer Rate	up to 16.6 Mb/sec
*Sustained Read	up to 10 Mb/sec
*Sustained Write	up to 9 Mb/sec

Reliability

Parameter	Value
**Cycle Endurance	1,000,000 cycles min.
*MTBF	>3,000,000 hrs
Data Retention	10 Yrs

Environmental Characteristics ***

Parameter	Value
Shock	40g’s at 11ms, MIL-STD-810, Method 516.5
Vibration	15Hz to 2000Hz, MIL-STD-810, Method 514.5
Humidity	95% R-H, MIL-STD-810, Method 507.4
Altitude	80,000 ft

NOTE: All CIS information is shown in HEX format.
* - Dependant on configuration and testing environment
** - Reference DDEndurance.doc
*** - Test details available upon request

Restriction of Hazardous Substances (RoHS)

These devices comply with all requirements of the European Union Directive 2002/95/EC (RoHS) and have been maintained in the manufacturing of this assembly. This assembly meets the following requirements:

1. Cadmium and Cadmium compounds	threshold 0.01% of weight
2. PBB and PBDE (halogenated flame retardant)	threshold 0.1% of weight
3. Mercury	threshold 0.1% of weight
4. Chromium (VI)	threshold 0.1% of weight
5. Lead and Lead compounds	threshold 0.1% of weight

This assembly meets the recommended maximum reflow temperature in accordance with IPC/JEDEC J-STD-020C.

Card Dimensions

Delkin Devices Industrial and Extended Temperature cards are PC/PCMCIA type I cards.

Length:	85.6 ± 0.2 mm (3.370 ±.008 in.)
Width:	54.0 ± 0.1 mm (2.126 ±.004 in.)
Thickness Including Label Area:	3.3 mm ± 0.1 mm (.130 ± .004 in.)
Weight:	12.0 g typical